Plug/Jack and Wiring Diagrams
Xerox Internal Use Only Phaser 7100 Service Manual 7-31
Represents an interconnection between parts using a conductive part such
as a Plate Spring.
I/L +24 VDC Denotes DC voltage when the Interlock Switch in the MCU Board turns On.
+5 VDC
+3.3 VDC
Denotes DC voltage.
SG Denotes signal ground.
AG Denotes analog ground.
RTN Denotes return.
Symbol Description
Interconnection, Conductive Part
To Next Page
Loading...
