Xerox Phaser 7100 Service Manual

Reference
Phaser 7100 Service Manual Xerox Internal Use OnlyA-10
PH Paper Handling
PHY Physical Layer
P/J Plug Jack (electrical connections)
PJL Printer Job Language
PL Parts List
POP3 Post Office Protocol version 3
POST Power On Self Test
PPD PostScript Printer Description
PPM Pages Per Minute
PPR Partial Page Request
PPS Pages
PPS Pulses Per Second
PR Photoreceptor
PU Print Unit
PV Print Volume Management
PWB Printed Wiring Board
PWBA Printed Wiring Board Assembly
RAM Random Access Memory
RAP Repair Analysis Procedure
R/E Reduction/Enlargement refers to features selection or components that
enable reduction or enlargement
RegiCon Registration Control
RET Retard
RGB Three primary colors of light - Red Green Blue
RH Relative Humidity
RIP Repair, Inspect, and Prevent
RLS Release
RMS Root Mean Square Voltage
ROM Read-Only Memory
ROS Raster Output Scanner.
Device that transfers digitally processed image, using laser light, to
photoreceptor - Laser Unit.
Acronym Description

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm