Xerox Phaser 7100 Service Manual

Reference
Xerox Internal Use Only Phaser 7100 Service Manual A-11
RTD Retard
SA Systems Administrator
SDTP Standard Digital Test Pattern
SEF Short-Edge Feed
SIM Simplex - Single Side printing
SLED New LED Print Head
SLP Service Location Protocol
SMART Self-monitoring, analysis and reporting technology
SMB Server Message Block
SNMP Simple Network Management Protocol
SNR Sensor
SOC Service Order Code
SODIMM Small Outline Dual In-line Memory Module
SOL Solenoid
SOS Start of Scan
STM Single Tray Module
STS Soft Touch Sensor
SW Software
T/A Takeaway
TCP Transmission Control Protocol
TDC Toner Density Control
TIFF Tagged Image File Format
TM Tray Module
TNR Toner
TRNS Transport
TV Television
UDP User Datagram Protocol
UI User Interface
USB Universal Serial Bus
VAC Volts Alternating Current
WC Waste Cartridge
Acronym Description

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm