Xerox Phaser 7100 Service Manual

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-257
5. Check the Turn Roller Clutch operation (Tray 3).
Perform DC330 Component Control on
page 2-26 [071-030] to check the operation of
the Turn Roller Clutch.
Is the Turn Roller Clutch operating properly?
Go to step 6. Go to Turn Rolle r
Clutch (Tray 2/ 3/ 4) on
page 2-425.
6. Check the Feeder Motor operation (Tray 3).
Perform DC330 Component Control on
page 2-26 [071-020] to check the operation of
the Feeder Motor.
Is the Feeder Motor operating normally?
Go to step 7. Go to Option Feeder
Mode Error on
page 2-451.
7. Check the Paper Jam Sensor operation (Tray 4).
Perform DC330 Component Control on
page 2-26 [071-127] to check the operation of
the Paper Jam Sensor.
Is the Paper Jam Sensor operating normally?
Replace the MCU PWB
(REP 12.4 MCU PWB
on page 4-206).
Go to Paper Jam
Sensor on page 2-443.
Troubleshooting Procedure (Continued)
Step Actions and Questions Yes No

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm