Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-317
4. Check the Belt Retract Motor operation.
Perform DC330 Component Control on
page 2-26 [094-001] to check the operation of
the Belt Retract Motor.
Is the Belt Retract Motor operating normally?
Replace the MCU PWB
(REP 12.4 MCU PWB
on page 4-206).
Go to Belt Retract
Motor on page 2-432.
Troubleshooting Procedure (Continued)
Step Actions and Questions Yes No
To Next Page
Loading...
