Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-320
116-220
When transitioning to the Download mode, the Downloader, which is a software that performs
download in the ESS, has failed during the software startup initialization.
Applicable Fault Code
• 116-220: Downloader Initialization Failure during Transition to Download Mode (In Normal mode
and in Forced Download mode)
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
• I/P PWB, PL 12.4.1
Troubleshooting Procedure
Step Actions and Questions
1. Check the connection of the System Memory on the I/P PWB.
If the problem occurs frequently, replace the I/P PWB (REP 12.17 Image Processor (I/P) PWB on
page 4-228).
If the problem persists, go to Common System Fail on page 2-406.
To Next Page
Loading...
