Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-404
127-353/ 127-354/ 127-396/ 127-398/ 127-399
Software processing error has occurred due to one of the following problems.
• An lpd-related fatal error. A problem has occurred in the software processing and it is unable to
continue with the subsequent processes.
• A Mail I/O-related fatal error. A problem has occurred in the software processing and it is unable to
continue with the subsequent processes.
• An IPP-related fatal error. A problem has occurred in the software processing and it is unable to
continue with the subsequent processes.
• A JME-related fatal error. A problem has occurred in the software processing and it is unable to
continue with the subsequent processes.
Applicable Fault Codes
• 127-353: lpd-related Fatal Error
• 127-354: FTP Server Fatal Error
• 127-396: Mail I/O-related Fatal Error
• 127-398: IPP-related Fatal Error
• 127-399: JME-related Fatal Error
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Procedure
Step Actions and Questions
1. Go to Network Troubleshooting on page 2-459.
To Next Page
Loading...
