Xerox Phaser 7100

Image Quality
Xerox Internal Use Only Phaser 7100 Service Manual 3-21
9. Check the Transfer Roller (2nd BTR).
Is the Transfer Roller normal, without any
contamination, damage, or wear and tear?
Replace the MCU PWB
(REP 12.4 MCU PWB
on page 4-206).
Replace the Transfer
Roller (REP 4.10
Transfer Roller (2nd
BTR Unit) on
page 4-108).
Reset the Transfer
Roller counter
(Resetting the Transfer
Roller (2nd BTR)
Counter on
page 6-12).
Troubleshooting Procedure (Continued)
Step Actions and Questions Yes No