Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-13
4. Release the Stand Bar Assembly (PL 9.1.26) from the Top Cover Assembly and secure the Stand
Bar in the holder.
CAUTION: Do not touch the bottom of the IBT Belt to prevent damaging the IBT Belt.
5. Remove the IBT Unit (REP 9.10 IBT Unit on page 4-177).
6. Remove the Top Cover Assembly (REP 1.1 Top Cover Assembly on page 4-9).
7. Turn the Top Cover Assembly over.
8. Remove the E-ring.
s7100-252
1
To Next Page
Loading...
