NETGEAR ProSAFE M7100-24X - Page 601

Log Messages
601
ProSAFE M7100 Managed Switches
802.1X dot1xSendRespToServer:
dot1xRadiusAccessRequestSend failed
Failed sending message to RADIUS server
802.1X dot1xRadiusAcceptProcess: error calling
radiusAc
countingStart, ifIndex=xxx
Failed sending accounting start to RADIUS
server
802.1X function: failed sending terminate cause, intf
xxx
Failed sending accounting stop to RADIUS
serv
er
Table 31. IGMP Snooping Log Messages
Component Message Cause
IGMP Snooping function: osapiMessageSend failed IGMP Snooping message queue is full
IGMP Snooping Failed to set global igmp snooping mode to
xxx
Failed to set global IGMP Snooping mode due
to mes
sage queue being full
IGMP Snooping Failed to set igmp snooping mode xxx for
inter
face yyy
Failed to set interface IGMP Snooping mode
due to message queue being full
IGMP Snooping Failed to set igmp mrouter mode xxx for
inter
face yyy
Failed to set interface multicast router mode
due to IGMP Snooping message queue being
full
IGMP Snooping Failed to set igmp snooping mode xxx for
VL
AN y
yy
Failed to set VLAN IGM Snooping mode due
to message queue being full
IGMP Snooping Failed to set igmp mrouter mode %d for
inter
face xxx on VLAN yyy
Failed to set VLAN multicast router mode due
to IGMP Snooping message queue being full
IGMP Snooping snoopCnfgrInitPhase1Process: Error
allocating small buf
fers
Could not allocate buffers for small IGMP
packets
IGMP Snooping snoopCnfgrInitPhase1Process: Error
allocating lar
ge buffers
Could not allocate buffers for large IGMP
packets
Table 32. GARP/GVRP/GMRP Log Messages
Component Message Cause
GARP/GVRP/
GMRP
garpSpanState, garpIfStateChange,
GarpIssueCmd, garpDo
t1sChangeCallBack,
garpApiCnfgrCommand,
garpLeaveAllTimerCallback,
garpTimerCallback: QUEUE SEND FAILURE:
The garpQueue is full, logs specifics of the
mes
sage content like internal interface
number, type of message, and so on.
GARP/GVRP/
GMRP
GarpSendPDU: QUEUE SEND FAILURE The garpPduQueue is full, logs specific of the
GPDU, internal int
erface number, VLAN id,
buffer handle, and so on.
Table 30. 802.1x Log Messages
Component Message Cause