Xerox Phaser 7100 Service Manual

Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-28
Cancel All Components
1. In the operation screen of the component that is running, press Right Arrow to return to the
DC330 Components - Components List screen at the previous level.
2. Press Down Arrow to display DC330 Components - Delete All screen at the same level.
3. Press Right Arrow to display the Delete All - Press OK to run screen.
4. Press OK to stop all components and delete the list. As the process is running, the Delete All - In
progress screen is displayed.
5. When the Delete All - Press OK to run screen is displayed again, the process has been completed.
6. Press Menu to return to the Diagnostics - Fault Diag. screen.
Component Check List (Input)
Input
Chain Link Component Description
010 200 Fuser Motor Alarm Detects the Alarm Signal of the Fuser Motor
(PL 4.2.16)
010 203 New Fuser Sensor
041 300 Interlock Front Cover Detects the High/ Low states of the Front
Cover Interlock Switch (PL 12.2.8)
041 301 Interlock Waste Cartridge Cover Detects the High/ Low states of the Waste
Cartridge Set Switch (PL 12.2.3)
041 302 Interlock Toner Cover Detects the High/ Low states of the Toner
Cover Interlock Switch (PL 8.1.14)
041 303 Front Cover Switch Detects the High/ Low states of the Front
Cover Switch (PL 12.2.7)
041 200 Low Voltage Power Supply Type
042 200 High Voltage Power Supply Developer
Fan Alarm
Detects the Alarm Signal of the Developer
Fan (PL 12.2.16)
042 201 High Voltage Power Supply 2 Fan Alarm Detects the Alarm Signal of the HVPS2 Fan
(PL 12.1.3)
042 202 Low Voltage Power Supply Fan Alarm Detects the Alarm Signal of the LVPS Fan (PL
12.2.22)
071 100 Bypass Tray No Paper Sensor Detects the High/ Low states of the Bypass
Tray No Paper Sensor (PL 4.4.3)
071 101 No Paper Sensor Detects the High/ Low states of the No Paper
Sensor (PL 2.2.2) (Tray1)
071 102 Registration Sensor Detects the High/ Low states of the
Registration Sensor (PL 5.1.3)
071 104 Fuser Exit Sensor Detects the High/ Low states of the Fuser Exit
Sensor (Fuser Unit) (PL 10.1.1)

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm