Xerox Phaser 7100

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-37
093 007 Waste Toner Motor Drives the Waste Toner Motor
(PL 9.1.6)
Although this usually required
that the Waste Cartridge is
installed, it is not really a
limitation.
093 008 Trickle Motor Drives the Trickle Motor (Auger
Assembly/ Trickle Guide) (PL
8.1.10)
Make sure that the Imaging Unit
(K) is installed.
If the rotation is performed with
it removed, it can cause failures
in the transport system.
094 001 Belt Retract Motor Drives the Belt Retract Motor
(Cam Assembly) (PL 9.1.8)
Although there is no limitation
for this, it is not possible to switch
between Color and B/W modes
as this will not stop
automatically.
094 003 Belt Color Mode
094 004 Belt Monochrome
Mode
Output (Continued)
Chain Link Component Description Limitations