Xerox Phaser 7100

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-39
8. Press Right Arrow to display the Partition A selection screen.
Note: The partition can be selected using Down/ Up Arrow in the order of: Partition A, Partition B,
Partition C, Partition D, Partition H, and Partition ALL.
9. Press OK to confirm the partition to be set up.
Note: When Partition D has been selected and confirmed, Partition D* will be displayed and
button operations become available.
10. Press OK to display the Setup - Press OK to run screen.
11. Press OK to display the confirmation message Delete HDD Data - Press OK screen.
12. Press OK to run the setup.
As the process is running, the Setup - In progress screen is displayed.
When the process has completed successfully, the Setup - Completed screen is displayed.