Xerox Phaser 7100

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-71
093-915 Toner CRUM Not Position C 2-310
093-916 Toner CRUM Not Position K1 2-310
093-924 Toner CRUM Comm Fail K1 2-311
093-925 Toner CRUM Data Broken Fail K1 2-311
093-926 Toner CRUM Data Mismatch Fail K1 2-308
093-927 Toner CRUM Comm Fail Y 2-311
093-928 Toner CRUM Comm Fail M 2-311
093-929 Toner CRUM Comm Fail C 2-311
093-933 Toner CRUM Data Broken Fail Y 2-311
093-934 Toner CRUM Data Broken Fail M 2-311
093-935 Toner CRUM Data Broken Fail C 2-311
093-937 Toner CRUM Data Mismatch Fail Y 2-308
093-938 Toner CRUM Data Mismatch Fail M 2-308
093-939 Toner CRUM Data Mismatch Fail C 2-308
093-963 Plural Toner Empty 2-195
2-309
094
094-310 CTD Sensor Error 2-313
094-311 IBT Unit Dead Stop 2-315
094-320 1st BTR Retract Fail/ 1st BTR Home Position Fail 2-316
094-321 1st BTR Contact Fail 2-316
094-417 IBT Unit Near End Warning -----
094-419 2nd BTR Unit Near End Warning -----
094-420 IBT Unit End Warning 2-315
094-422 2nd BTR Unit End Warning (Quality Life End) 2-318
102
102-356 EWS-related Fatal Error 2-319
116
116-220 Downloader Initialization Failure during Transition to Download Mode 2-320
Error Message and Chain Link Code Display (Continued)
Chain Link Control Panel Message Go to Page