Xerox Phaser 7100 Service Manual

Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-75
116-741 Form registration error. The form data cannot be registered due to the
restriction on the number of forms.
2-366
116-742 Logo registration error. The logo data cannot be registered due to the
restriction on the number of logos.
2-367
116-743 Form/logo size overflow. The received data (form/logo) exceeded the
registered buffer size.
2-367
116-745 ART Command Error. During Decompose, the Decomposer checks for errors
in grammar and values that exceed their respective limit values.
2-368
116-746 Form Overlay Error. The specified form is not registered. 2-368
116-747 White page was detected. After subtracting the paper margin from the
valid coordinate area, the result of the calculation will be negative.
2-369
116-748 White page was detected. Drawing data does not exist in the page data. 2-369
116-749 PS Font Error. Job was aborted because the specified font is not found. 2-369
116-752 PDF print job ticket description warning 2-370
118
118-310 IPSEC Internal Error 2-370
121
121-314 Customize User Prompts Fail 2-371
121-318 Auth/ Account Settings is not Supported 2-371
124
124-310 Product Number Fail (contents corrupted, the Controller PWB was replaced) 2-372
124-311 Serial Number Fail (contents corrupted, the Controller PWB was replaced) 2-372
124-312 Product Number fails when at least one Product Number is mismatched. 2-373
124-313 Serial Number fails when at least one Serial Number is mismatched. 2-373
124-314 The IOT productivity switch data was not set at all 3 locations. 2-374
124-315 At least one of the IOT productivity switch data was at the 3 locations is
different. All IOT speed mismatch.
2-375
124-316 The Product a/f Model was not set at all 3 locations. Product Model Fail. 2-376
124-317 At least one of the Product a/f Model at the 3 locations is different. All
Product Model mismatch.
2-375
124-318 The Product Type for SWKey was not set at all 3 locations. Product Type for
SWKey fails.
2-376
Error Message and Chain Link Code Display (Continued)
Chain Link Control Panel Message Go to Page

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English