Xerox Phaser 7100 Service Manual

Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-74
116-390 Standard ROM and NVM Version Mismatch 2-353
116-391 Country Code/ Territory Code/ Paper Size Group Setting Error Detected 2-354
116-393 AAA Manager Fatal Error 2-355
116-394 Abnormal Authentication Mode and Accounting Mode Settings Detected
during AAA Manager Boot Sequence
2-355
116-395 A USB-related Fatal Error 2-356
116-396 During start up, an error was detected by the self test of the FIPS140
encryption module.
2-356
116-397 Plain Total Color Judgment Threshold Value Settings Incorrect 2-357
116-399 The printer is still being initialized after 10 minutes has passed since it was
started up.
2-358
116-701 One-page data was printed on multiple pages during 2 sided print 2-358
116-702 Print With Substitute Font 2-359
116-703 An error has occurred in language analysis. 2-359
116-710 HP-GL Spool File Overflow 2-360
116-711 Form Overlay is impossible because the size/orientation of the PLW form's
drawing is different from that of the paper.
2-360
116-712 The PLW form/ logo data cannot be registered due to insufficient RAM or
HD space.
2-361
116-713 The job output was split into batches due to HDD Full. 2-361
116-714 A HP-GL command error was detected. 2-362
116-715 PLW form registration error. The PLW form data cannot be registered
because of the restriction on the number of forms.
2-362
116-718 PLW form synthesis error. The specified form is not registered. 2-363
116-720 PCL Memory Low, Page Simplified 2-363
116-725 Disk Fail at Log Image Area 2-364
116-737 The user defined data (external characters, patterns, etc) cannot be
registered due to insufficient RAM capacity.
2-364
116-738 Form Overlay is impossible because the size/ orientation of the form's
drawing is different from that of the paper.
2-365
116-739 The form/ logo data cannot be registered due to insufficient RAM or Hard
Disk space.
2-365
116-740 Value Calculation Error. The value calculated in the Interpreter exceeded
the limit.
2-366
Error Message and Chain Link Code Display (Continued)
Chain Link Control Panel Message Go to Page

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English