1 Fundamental safety instructions
1.1 General safety instructions
SINAMICS DCM
10 List Manual (LH8), 02/2015, 6RX1800-0ED76
1.1 General safety instructions
WARNING
Risk of death if the safety instructions and remaining risks are not carefully observed
If the safety instructions and residual risks are not carefully observed in the associated
hardware documentation, accidents involving severe injuries or death can occur.
• Observe the safety instructions given in the hardware documentation.
• When assessing the risk, take into account residual risks.
WARNING
Danger to life or malfunctions of the machine as a result of incorrect or changed
parameter assignment
Machines can malfunction as a result of incorrect or changed parameter assignment, which
in turn can lead to injuries or death.
• Protect the parameterization (parameter assignments) against unauthorized access.
• Respond to possible malfunctions by applying suitable measures
(e.g. EMERGENCY-STOP or EMERGENCY-OFF).
To Next Page
Loading...
Need help?
General
