Siemens SINAMICS DCM - Friction Compensation 30 % Speed; Fric Comp N 30%; Friction Compensation 40 % Speed; Fric Comp N 40%; Friction Compensation 50 % Speed; Fric Comp N 50%; Friction Compensation 60 % Speed; Fric Comp N 60%

SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
471
2 Parameters
2.2 List of parameters
Description: Sets friction compensation at 30 % speed.
Description: Sets friction compensation at 40 % speed.
Description: Sets friction compensation at 50 % speed.
Description: Sets friction compensation at 60 % speed.
Description: Sets friction compensation at 70 % speed.
p50523[0...n] Friction compensation 30 % speed / Fric comp n 30%
DC_CTRL Can be changed: U, T Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: DDS, p0180 Func. diagram: 6820
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
0.0 [%] 100.0 [%] 0.0 [%]
p50524[0...n] Friction compensation 40 % speed / Fric comp n 40%
DC_CTRL Can be changed: U, T Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: DDS, p0180 Func. diagram: 6820
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
0.0 [%] 100.0 [%] 0.0 [%]
p50525[0...n] Friction compensation 50 % speed / Fric comp n 50%
DC_CTRL Can be changed: U, T Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: DDS, p0180 Func. diagram: 6820
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
0.0 [%] 100.0 [%] 0.0 [%]
p50526[0...n] Friction compensation 60 % speed / Fric comp n 60%
DC_CTRL Can be changed: U, T Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: DDS, p0180 Func. diagram: 6820
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
0.0 [%] 100.0 [%] 0.0 [%]
p50527[0...n] Friction compensation 70 % speed / Fric comp n 70%
DC_CTRL Can be changed: U, T Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: DDS, p0180 Func. diagram: 6820
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
0.0 [%] 100.0 [%] 0.0 [%]