2 Parameters
2.2 List of parameters
SINAMICS DCM
598 List Manual (LH8), 02/2015, 6RX1800-0ED76
Description: Connector output for fixed value 4 set in p50404.
Dependency: Refer to: p50404
Description: Connector output for fixed value 5 set in p50405.
Dependency: Refer to: p50405
Description: Connector output for fixed value 6 set in p50406.
Dependency: Refer to: p50406
Description: Connector output for fixed value 7 set in p50407.
Dependency: Refer to: p50407
Description: Connector output for fixed value 8 set in p50408.
Dependency: Refer to: p50408
r52404 CO: Fixed value 4 / Fix val 4
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 3100
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r52405 CO: Fixed value 5 / Fix val 5
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 3100
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r52406 CO: Fixed value 6 / Fix val 6
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 3100
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r52407 CO: Fixed value 7 / Fix val 7
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 3100
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r52408 CO: Fixed value 8 / Fix val 8
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 3100
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
To Next Page
Loading...
