Siemens SINAMICS DCM - OA Interface Version; OA Interf_Vers; OA Version; OA Version

2 Parameters
2.2 List of parameters
SINAMICS DCM
288 List Manual (LH8), 02/2015, 6RX1800-0ED76
Description: Displays the version of all the OA applications installed on the memory card/device memory.
r4989[0]: Version of OA application 1
r4989[1]: Version of OA application 2, ...
Dependency: Refer to: r4985, r4986, r4987, r4988, r4990, r4991, r4992, r4993, r4994
Notice: If there is no OA application, then it is not possible to access an index.
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
Description: Displays the interface version of all the OA applications installed on the memory card/device memory.
r4990[0]: Interface version of OA application 1
r4990[1]: Interface version of OA applications 2, ...
Dependency: Refer to: r4985, r4986, r4987, r4988, r4989, r4991, r4992, r4993, r4994
Notice: If there is no OA application, then it is not possible to access an index.
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
Description: Displays the GUID of all the OA applications installed on the memory card/device memory.
r4991[0...15]: GUID of OA application 1
r4991[16]: Major information of OA application 1
r4991[17]: Minor information of OA application 1
r4991[18...33]: GUID of OA application 2
r4991[34]: Major information of OA application 2
r4991[35]: Minor information of OA application 2, ...
Dependency: Refer to: r4985, r4986, r4987, r4988, r4989, r4990, r4992, r4993, r4994
Notice: If there is no OA application, then it is not possible to access an index.
r4989[0...n] OA version / OA version
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 4
Data type: Unsigned32 Dyn. index: r4985 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r4990[0...n] OA interface version / OA interf_vers
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 4
Data type: Unsigned32 Dyn. index: r4985 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r4991[0...n] OA GUID / OA GUID
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 4
Data type: Unsigned8 Dyn. index: r4987 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -