SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
559
2 Parameters
2.2 List of parameters
Description: Load connection: signal source for varying the capacitance of the DC link capacitor
Description: Connector output with constant fixed value 0 %.
Description: Connector output with constant fixed value 100 %.
Description: Connector output with constant fixed value 200 %.
Description: Connector output with constant fixed value -100 %.
p51862 CI: Capacitance of the DC link capacitor signal source / C_DC link s_src
DC_CTRL Can be changed: T Calculated: - Access level: 3
Data type: Unsigned32 / FloatingPoint32 Dyn. index: - Func. diagram: 6902
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 1
r52000 CO: Fixed value 0 % / Fix val 0%
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 3100
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r52001 CO: Fixed value 100 % / Fix val 100%
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 3100
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r52002 CO: Fixed value 200 % / Fix val 200%
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 3100
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r52003 CO: Fixed value -100 % / Fix val -100%
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 3100
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
To Next Page
Loading...
