Siemens SINAMICS DCM - Trace Data Type 5 Traced; Trace Rec Type 5; Trace Data Type 6 Traced; Trace Rec Type 6; Trace Data Type 7 Traced; Trace Rec Type 7; Trace Data Type 8 Traced; Trace Rec Type 8

2 Parameters
2.2 List of parameters
SINAMICS DCM
274 List Manual (LH8), 02/2015, 6RX1800-0ED76
Description: Displays the recorded data type 5 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 6 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 7 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 8 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Changes over the memory bank to read out the contents of the trace buffer.
Dependency: Refer to: r4740, r4741, r4742, r4743, r4750, r4751, r4752, r4753
r4790[0...1] Trace data type 5 traced / Trace rec type 5
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4791[0...1] Trace data type 6 traced / Trace rec type 6
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4792[0...1] Trace data type 7 traced / Trace rec type 7
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4793[0...1] Trace data type 8 traced / Trace rec type 8
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
p4795 Trace memory bank changeover / Trace mem changeov
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0 500 0