Siemens SINAMICS DCM - CO;BO: TM31 Digital Inputs Status Inverted; TM31 DI Status Inv; CO: TM15 DI;DO Digital Inputs 16... 23 Status; TM15 D DI 16-23 St

2 Parameters
2.2 List of parameters
SINAMICS DCM
214 List Manual (LH8), 02/2015, 6RX1800-0ED76
Dependency: Refer to: r4022, r4024, r4025
Notice: For the BICO interconnection of the connector output (CO) only bit 00 ... 15 are transferred.
Note: DI/DO: Bidirectional Digital Input/Output
Description: Displays the inverted status of the digital inputs of Terminal Module 31 (TM31).
Dependency: Refer to: r4022
Note: DI: Digital Input
DI/DO: Bidirectional Digital Input/Output
Description: Displays the status of digital inputs 16 ... 23 of Terminal Module 15 (TM15).
Dependency: Refer to: r4022, r4023, r4025
14 DI/DO 14 (X521.8) High Low -
15 DI/DO 15 (X521.9) High Low -
16 DI/DO 16 (X522.2) High Low -
17 DI/DO 17 (X522.3) High Low -
18 DI/DO 18 (X522.4) High Low -
19 DI/DO 19 (X522.5) High Low -
20 DI/DO 20 (X522.6) High Low -
21 DI/DO 21 (X522.7) High Low -
22 DI/DO 22 (X522.8) High Low -
23 DI/DO 23 (X522.9) High Low -
r4023.0...11 CO/BO: TM31 digital inputs status inverted / TM31 DI status inv
TM31 Can be changed: - Calculated: - Access level: 1
Data type: Unsigned32 Dyn. index: - Func. diagram: 9549, 9550,
9552, 9560, 9562
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI 0 (X520.1) High Low -
01 DI 1 (X520.2) High Low -
02 DI 2 (X520.3) High Low -
03 DI 3 (X520.4) High Low -
04 DI 4 (X530.1) High Low -
05 DI 5 (X530.2) High Low -
06 DI 6 (X530.3) High Low -
07 DI 7 (X530.4) High Low -
08 DI/DO 8 (X541.2) High Low -
09 DI/DO 9 (X541.3) High Low -
10 DI/DO 10 (X541.4) High Low -
11 DI/DO 11 (X541.5) High Low -
r4024 CO: TM15DI/DO digital inputs 16 ... 23 status / TM15D DI 16-23 St
TM15DI_DO Can be changed: - Calculated: - Access level: 1
Data type: Unsigned16 Dyn. index: - Func. diagram: 9402
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI/DO 16 (X522.2) ON OFF -
01 DI/DO 17 (X522.3) ON OFF -
02 DI/DO 18 (X522.4) ON OFF -
03 DI/DO 19 (X522.5) ON OFF -
04 DI/DO 20 (X522.6) ON OFF -
05 DI/DO 21 (X522.7) ON OFF -
06 DI/DO 22 (X522.8) ON OFF -
07 DI/DO 23 (X522.9) ON OFF -