SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
605
2 Parameters
2.2 List of parameters
Description: Display and connector output on the binector-connector converter.
Dependency: Refer to: p51117
Note: The individual signals supplied via binector input p51117[0 to 15] are combined to form connector output r52620.
Description: Display and connector output of the word-by-word receive data from the master on the parallel interface.
Index: [0] = Word 1
[1] = Word 2
[2] = Word 3
[3] = Word 4
[4] = Word 5
[5] = Word 6
[6] = Word 7
[7] = Word 8
[8] = Word 9
[9] = Word 10
[10] = Word 11
[11] = Word 12
[12] = Word 13
[13] = Word 14
[14] = Word 15
[15] = Word 16
Dependency: Refer to: r52720
Note: The receive data in word 1 is also available in non-scaled format bit by bit and word by word for further
interconnection.
r52620.0...15 CO/BO: Binector-connector converter output / Bin/con outp
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: Unsigned16 Dyn. index: - Func. diagram: 9300
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 P2P binector-connector converter bit 0 1 0 9300
01 P2P binector-connector converter bit 1 1 0 9300
02 P2P binector-connector converter bit 2 1 0 9300
03 P2P binector-connector converter bit 3 1 0 9300
04 P2P binector-connector converter bit 4 1 0 9300
05 P2P binector-connector converter bit 5 1 0 9300
06 P2P binector-connector converter bit 6 1 0 9300
07 P2P binector-connector converter bit 7 1 0 9300
08 P2P binector-connector converter bit 8 1 0 9300
09 P2P binector-connector converter bit 9 1 0 9300
10 P2P binector-connector converter bit 10 1 0 9300
11 P2P binector-connector converter bit 11 1 0 9300
12 P2P binector-connector converter bit 12 1 0 9300
13 P2P binector-connector converter bit 13 1 0 9300
14 P2P binector-connector converter bit 14 1 0 9300
15 P2P binector-connector converter bit 15 1 0 9300
r52700[0...15] CO: Parallel interface master receive data word by word / Master recv wbw
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 9352
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
To Next Page
Loading...
