Siemens SINAMICS DCM List Manual

SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
273
2 Parameters
2.2 List of parameters
Description: Sets the physical address for the sixth signal to be traced.
The data type is defined using p4735.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the seventh signal to be traced.
The data type is defined using p4736.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the eighth signal to be traced.
The data type is defined using p4737.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the trigger signal.
The data type is defined by making the appropriate selection in p4711.
Index: [0] = Trace 0
[1] = Trace 1
p4785[0...1] Trace physical address signal 5 / Trace PhyAddr Sig5
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4786[0...1] Trace physical address signal 6 / Trace PhyAddr Sig6
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4787[0...1] Trace physical address signal 7 / Trace PhyAddr Sig7
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4789[0...1] Trace physical address trigger signal / Trace PhyAddr Trig
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 hex FFFF FFFF hex 0000 hex

Siemens SINAMICS DCM Specifications

General

Brand	Siemens
Model	SINAMICS DCM
Category	Media Converter
Language	English