Siemens SINAMICS DCM - BI: TM15 DI;DO Signal Source for Terminal DI;DO 20; TM15 D S_Srcdi;Do20; BI: TM15 DI;DO Signal Source for Terminal DI;DO 21; TM15 D S_Srcdi;Do21; BI: TM15 DI;DO Signal Source for Terminal DI;DO 22; TM15 D S_Srcdi;Do22; BI: TM15 DI;DO Signal Source for Terminal DI;DO 23; TM15 D S_Srcdi;Do23

SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
233
2 Parameters
2.2 List of parameters
Description: Sets the signal source for terminal DI/DO 20 (X522.6) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.20 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 21 (X522.7) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.21 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 22 (X522.8) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.22 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 23 (X522.9) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.23 = 1).
DI/DO: Bidirectional Digital Input/Output
p4090 BI: TM15DI/DO signal source for terminal DI/DO 20 / TM15D s_srcDI/DO20
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dyn. index: - Func. diagram: 9402
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0
p4091 BI: TM15DI/DO signal source for terminal DI/DO 21 / TM15D s_srcDI/DO21
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dyn. index: - Func. diagram: 9402
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0
p4092 BI: TM15DI/DO signal source for terminal DI/DO 22 / TM15D s_srcDI/DO22
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dyn. index: - Func. diagram: 9402
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0
p4093 BI: TM15DI/DO signal source for terminal DI/DO 23 / TM15D s_srcDI/DO23
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dyn. index: - Func. diagram: 9402
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0