EasyManua.ls Logo

Siemens SINAMICS DCM - CO;BO: Parallel Interface Slave 4 Receive Word 1 Bit by Bit; CO;BO: Parallel Interface Slave 5 Receive Word 1 Bit by Bit

Siemens SINAMICS DCM
1204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Parameters
2.2 List of parameters
SINAMICS DCM
616 List Manual (LH8), 02/2015, 6RX1800-0ED76
Description: Display and binector/connector output for receive word 1 from slave 4 on the parallel interface.
Dependency: Refer to: r52704
Note: Receive word 1 is also available scaled word by word for further interconnection.
Description: Display and binector/connector output for receive word 1 from slave 5 on the parallel interface.
Dependency: Refer to: r52705
Note: Receive word 1 is also available scaled word by word for further interconnection.
r52724.0...15 CO/BO: Parallel interface slave 4 receive word 1 bit by bit / Slave4 recv1 bbb
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: Unsigned16 Dyn. index: - Func. diagram: 9352
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 Bit 0 Yes No 9352
01 Bit 1 Yes No 9352
02 Bit 2 Yes No 9352
03 Bit 3 Yes No 9352
04 Bit 4 Yes No 9352
05 Bit 5 Yes No 9352
06 Bit 6 Yes No 9352
07 Bit 7 Yes No 9352
08 Bit 8 Yes No 9352
09 Bit 9 Yes No 9352
10 Bit 10 Yes No 9352
11 Bit 11 Yes No 9352
12 Bit 12 Yes No 9352
13 Bit 13 Yes No 9352
14 Bit 14 Yes No 9352
15 Bit 15 Yes No 9352
r52725.0...15 CO/BO: Parallel interface slave 5 receive word 1 bit by bit / Slave5 recv1 bbb
DC_CTRL Can be changed: - Calculated: - Access level: 2
Data type: Unsigned16 Dyn. index: - Func. diagram: 9352
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 Bit 0 Yes No 9352
01 Bit 1 Yes No 9352
02 Bit 2 Yes No 9352
03 Bit 3 Yes No 9352
04 Bit 4 Yes No 9352
05 Bit 5 Yes No 9352
06 Bit 6 Yes No 9352
07 Bit 7 Yes No 9352
08 Bit 8 Yes No 9352
09 Bit 9 Yes No 9352
10 Bit 10 Yes No 9352
11 Bit 11 Yes No 9352
12 Bit 12 Yes No 9352
13 Bit 13 Yes No 9352
14 Bit 14 Yes No 9352
15 Bit 15 Yes No 9352

Table of Contents

Other manuals for Siemens SINAMICS DCM

Related product manuals