Siemens SINAMICS DCM - BI: RFG Signal Source for Ramp-Up Integrator Enable; BI: RFG Tracking Activation Signal Source; RFG Trck Act Sig S; CI: Setpoint Processing Signal Source for Additional Setpoint; CI: Setpoint Processing Signal Source for Main Setpoint; M Set Sig S

2 Parameters
2.2 List of parameters
SINAMICS DCM
494 List Manual (LH8), 02/2015, 6RX1800-0ED76
Description: Sets the signal source for the main setpoint in the context of setpoint processing.
Dependency: Refer to: p50320, p50322
Description: Sets the signal source for the additional setpoint in the context of setpoint processing.
Dependency: Refer to: p50321, p50323
Description: Sets the signal source for enabling the ramp-up integrator on the ramp-function generator.
Description: Sets the signal source for activating/de-activating ramp-function generator tracking.
Dependency: The enable for ramp-function generator tracking must be available (p50317 = 1).
Refer to: p50317
Description: Sets the signal source for the ramp-function generator's input signal.
p50644[0...n] CI: Setpoint processing signal source for main setpoint / M set sig s
DC_CTRL Can be changed: T Calculated: - Access level: 3
Data type: Unsigned32 / FloatingPoint32 Dyn. index: CDS, p0170 Func. diagram: 3135
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 52206[0]
p50645[0...n] CI: Setpoint processing signal source for additional setpoint / A set sig s
DC_CTRL Can be changed: T Calculated: - Access level: 3
Data type: Unsigned32 / FloatingPoint32 Dyn. index: CDS, p0170 Func. diagram: 3135
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 0
p50646[0...n] BI: RFG signal source for ramp-up integrator enable / R-up int ena sig s
DC_CTRL Can be changed: T Calculated: - Access level: 3
Data type: Unsigned32 / Binary Dyn. index: CDS, p0170 Func. diagram: 3150
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 1
p50647[0...n] BI: RFG tracking activation signal source / RFG trck act sig s
DC_CTRL Can be changed: T Calculated: - Access level: 3
Data type: Unsigned32 / Binary Dyn. index: CDS, p0170 Func. diagram: 3152
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0
p50648 CI: RFG signal source for input signal / RFG inp sig sig s
DC_CTRL Can be changed: T Calculated: - Access level: 3
Data type: Unsigned32 / FloatingPoint32 Dyn. index: - Func. diagram: 3151
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 52193[0]