Siemens SINAMICS DCM List Manual

SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
513
2 Parameters
2.2 List of parameters
Description: Sets the offset for analog output 1 (X177.51/52).
Description: Setting to select the simulation of the digital inputs on the CUD.
Dependency: Refer to: p50766
Note: The setpoint for the simulation is set in p50766.0...7.
Description: Sets the setpoint for the simulation of the digital inputs on the CUD.
Dependency: Refer to: p50765
Note: Simulation is selected using p50765.0...7 = 1.
p50759 CUD analog output 1 offset / CUD AO 1 offs
DC_CTRL Can be changed: U, T Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 2095
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
-10.00 [V] 10.00 [V] 0.00 [V]
p50765 CUD digital inputs simulation selection / CUD DI sim sel
DC_CTRL Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned16 Dyn. index: - Func. diagram: 2050, 2060,
2065
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0000 0000 bin
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI 0 (X177.11) High Low 2050
01 DI 1 (X177.12) High Low 2050
02 DI 2 (X177.13) High Low 2050
03 DI 3 (X177.14) High Low 2050
04 DI 4 (X177.15) High Low 2060
05 DI 5 (X177.16) High Low 2060
06 DI 6 (X177.17) High Low 2065
07 DI 7 (X177.18) High Low 2065
p50766 CUD digital inputs simulation setpoint / CUD DI simul setp
DC_CTRL Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned16 Dyn. index: - Func. diagram: 2050, 2060,
2065
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0000 0000 bin
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI 0 (X177.11) High Low 2050
01 DI 1 (X177.12) High Low 2050
02 DI 2 (X177.13) High Low 2050
03 DI 3 (X177.14) High Low 2050
04 DI 4 (X177.15) High Low 2060
05 DI 5 (X177.16) High Low 2060
06 DI 6 (X177.17) High Low 2065
07 DI 7 (X177.18) High Low 2065

Siemens SINAMICS DCM Specifications

General

Brand	Siemens
Model	SINAMICS DCM
Category	Media Converter
Language	English