Siemens SINAMICS DCM - Trace Data Type 2 Traced; Trace Rec Type 2; Trace Data Type 3 Traced; Trace Rec Type 3; Trace Data Type 4 Traced; Trace Rec Type 4; Trace Number of Recorded Values; Trace Rec Values

2 Parameters
2.2 List of parameters
SINAMICS DCM
262 List Manual (LH8), 02/2015, 6RX1800-0ED76
Description: Displays the recorded data type 2 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 3 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 4 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the number of traced values for each signal.
Index: [0] = Trace 0
[1] = Trace 1
Dependency: Only valid when p4705 = 4.
Description: Selects the first signal to be traced.
r4726[0...1] Trace data type 2 traced / Trace rec type 2
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4727[0...1] Trace data type 3 traced / Trace rec type 3
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4728[0...1] Trace data type 4 traced / Trace rec type 4
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4729[0...1] Trace number of recorded values / Trace rec values
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
p4730[0...5] Trace record signal 0 / Trace record sig 0
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - 0