Siemens SINAMICS DCM - BI: TM15 DI;DO Signal Source for Terminal DI;DO 16; BI: TM15 DI;DO Signal Source for Terminal DI;DO 17; TM15 D S_Srcdi;Do17; BI: TM15 DI;DO Signal Source for Terminal DI;DO 18; TM15 D S_Srcdi;Do18; BI: TM15 DI;DO Signal Source for Terminal DI;DO 19; TM15 D S_Srcdi;Do19

2 Parameters
2.2 List of parameters
SINAMICS DCM
232 List Manual (LH8), 02/2015, 6RX1800-0ED76
Description: Sets the signal source for terminal DI/DO 16 (X522.2) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.16 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 17 (X522.3) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.17 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 18 (X522.4) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.18 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 19 (X522.5) of Terminal Module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.19 = 1).
DI/DO: Bidirectional Digital Input/Output
p4086 BI: TM15DI/DO signal source for terminal DI/DO 16 / TM15D s_srcDI/DO16
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dyn. index: - Func. diagram: 9402
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0
p4087 BI: TM15DI/DO signal source for terminal DI/DO 17 / TM15D s_srcDI/DO17
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dyn. index: - Func. diagram: 9402
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0
p4088 BI: TM15DI/DO signal source for terminal DI/DO 18 / TM15D s_srcDI/DO18
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dyn. index: - Func. diagram: 9402
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0
p4089 BI: TM15DI/DO signal source for terminal DI/DO 19 / TM15D s_srcDI/DO19
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dyn. index: - Func. diagram: 9402
P-Group: Commands Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0