SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
285
2 Parameters
2.2 List of parameters
Description: Displays the GUIDs of the OA applications installed on this drive object.
r4959[0...15]: GUID of OA application 1
r4959[16]: Major information of OA application 1
r4959[17]: Minor information of OA application 1
r4959[18...33]: GUID of OA application 2
r4959[34]: Major information of OA application 2
r4959[35]: Minor information of OA application 2, ...
Dependency: Refer to: r4950, r4951, r4952, r4955, p4956, r4957, r4958, r4960
Notice: If there is no OA application, then it is not possible to access an index.
Description: Displays the GUIDs of this drive object of the OA applications installed on the memory card/device memory.
r4960[0...15]: GUID of this drive object of OA application 1
r4960[16]: Major information of this drive object of OA application 1
r4960[17]: Minor information of this drive object of OA application 1
r4960[18...33]: GUID of this drive object of OA application 2
r4960[34]: Major information of this drive object of OA application 2
r4960[35]: Minor information of this drive object of OA application 2, ...
Dependency: Refer to: r4950, r4951, r4952, r4955, p4956, r4957, r4958, r4959
Notice: If there is no OA application, then it is not possible to access an index.
Description: Only for service purposes.
Description: Displays the number of invalid OA applications installed on the memory card/device memory.
Dependency: Refer to: r4976, r4978, r4979
r4959[0...n] OA DO-specific GUID / OA DO GUID
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned8 Dyn. index: r4952 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r4960[0...n] OA DO-specific GUID drive object / OA DO GUID DO
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned8 Dyn. index: r4952 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
p4961[0...n] OA DO-specific logbook module selection / OA DO log module
All objects Can be changed: T Calculated: - Access level: 4
Data type: Unsigned32 Dyn. index: r4950 Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0000 hex FFFF FFFF hex 0000 hex
r4975 OA invalid number / OA inv no.
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 4
Data type: Unsigned16 Dyn. index: - Func. diagram: -
P-Group: OEM range Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
To Next Page
Loading...
