Siemens SINAMICS DCM - Trace 0 Trace Buffer Signal 7; Trace 0 Tr Sig 7; Trace 1 Trace Buffer Signal 0; Trace 1 Trace Sig0; Trace 1 Trace Buffer Signal 1; Trace 1 Tr Sig 1; Trace 1 Trace Buffer Signal 2; Trace 1 Tr Sig 2

2 Parameters
2.2 List of parameters
SINAMICS DCM
270 List Manual (LH8), 02/2015, 6RX1800-0ED76
Description: Displays the trace buffer (record buffer) for trace 0 and signal 7.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 0.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 1.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 2.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 3.
Dependency: Refer to: r4760
r4767[0...16383] Trace 0 trace buffer signal 7 / Trace 0 tr sig 7
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4770[0...16383] Trace 1 trace buffer signal 0 / Trace 1 trace sig0
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4771[0...16383] Trace 1 trace buffer signal 1 / Trace 1 tr sig 1
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4772[0...16383] Trace 1 trace buffer signal 2 / Trace 1 tr sig 2
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4773[0...16383] Trace 1 trace buffer signal 3 / Trace 1 tr sig 3
CU_DC, CU_DC_R,
CU_DC_R_S,
CU_DC_S
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -