SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
527
2 Parameters
2.2 List of parameters
For the Control Module, the serial number of the voltage sensing module is displayed.
r50840[0]: Serial number character 1
...
r50840[31]: Serial number character 32
For the commissioning software, the ASCII characters are displayed uncoded.
Note: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Description: Displays the part number of the gating module.
For the Control Module, the part number of the voltage sensing module is displayed.
r50841[0]: Part number character 1
...
r50841[31]: Part number character 32
For the commissioning software, the ASCII characters are displayed uncoded.
Note: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Description: Displays the serial number of the field module.
Note: The individual digits of the number are displayed in ASCII code in the indices.
An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Description: Displays the part number of the field module.
Note: The individual digits of the number are displayed in ASCII code in the indices.
An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Description: Setting to activate/de-activate control blocks.
r50841[0...31] Gating module part number / Gat_mod part no.
DC_CTRL Can be changed: - Calculated: - Access level: 1
Data type: Unsigned8 Dyn. index: - Func. diagram: 6960
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r50842[0...31] Field module serial number / Field mod ser no.
DC_CTRL Can be changed: - Calculated: - Access level: 1
Data type: Unsigned8 Dyn. index: - Func. diagram: 6960
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r50843[0...31] Field module part number / Field mod part no.
DC_CTRL Can be changed: - Calculated: - Access level: 1
Data type: Unsigned8 Dyn. index: - Func. diagram: 6960
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
p50899[0...6] Control blocks activation / Ctrl blocks act
DC_CTRL Can be changed: T Calculated: - Access level: 3
Data type: Integer16 Dyn. index: - Func. diagram: 1721
P-Group: - Unit group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0 1 1
To Next Page
Loading...
