Siemens SINAMICS DCM

To Next Page

To Previous Page

SINAMICS DCM

List Manual (LH8), 02/2015, 6RX1800-0ED76

137

2 Parameters

2.2 List of parameters

[54] = PZD 55

[55] = PZD 56

[56] = PZD 57

[57] = PZD 58

[58] = PZD 59

[59] = PZD 60

[60] = PZD 61

[61] = PZD 62

[62] = PZD 63

[63] = PZD 64

Dependency: Refer to: p2051, p2061

Note: IF1: Interface 1

Description: Displays the PZD (actual values) with word format sent to the fieldbus controller.

Index: [0] = PZD 1

[1] = PZD 2

[2] = PZD 3

[3] = PZD 4

[4] = PZD 5

Note: IF1: Interface 1

Bit field: Bit Signal name 1 signal 0 signal FP

00 Bit 0 ON OFF -

01 Bit 1 ON OFF -

02 Bit 2 ON OFF -

03 Bit 3 ON OFF -

04 Bit 4 ON OFF -

05 Bit 5 ON OFF -

06 Bit 6 ON OFF -

07 Bit 7 ON OFF -

08 Bit 8 ON OFF -

09 Bit 9 ON OFF -

10 Bit 10 ON OFF -

11 Bit 11 ON OFF -

12 Bit 12 ON OFF -

13 Bit 13 ON OFF -

14 Bit 14 ON OFF -

15 Bit 15 ON OFF -

r2053[0...4] IF1 PROFIdrive diagnostics PZD send word / IF1 diag send word

TM150, TM15DI_DO,

TM31

Can be changed: - Calculated: - Access level: 3

Data type: Unsigned16 Dyn. index: - Func. diagram: -

P-Group: Communications Unit group: - Unit selection: -

Not for motor type: - Scaling: - Expert list: 1

Min Max Factory setting

- - -