ABB AC500 PLC - 1.1.1.4 Ordering Data

1.1.1.4 Ordering Data
Part No. Description Product Life Cycle Phase *)
1SAP 111 100 R0260 TB511-ARCNET,
terminal base AC500, slots:
1 processor module, 1 communication
module, ARCNET COAX connector
Active
1SAP 111 100 R0270 TB511-ETH, terminal base AC500,
slots: 1 processor module,
1 communication module, Ethernet
RJ45 connector
Active
1SAP 311 100 R0270 TB511-ETH-XC,
terminal base AC500, slots:
1 processor module, 1 communication
module, Ethernet RJ45 connector,
XC version
Active
1SAP 112 100 R0260 TB521-ARCNET,
terminal base AC500, slots:
1 processor module, 2 communication
modules, ARCNET COAX connector
Active
1SAP 112 100 R0270 TB521-ETH, terminal base AC500,
slots: 1 processor module,
2 communication modules, with
network interface Ethernet RJ45
Active
1SAP 312 100 R0270 TB521-ETH-XC,
terminal base AC500, slots:
1 processor module, 2 communication
modules, with network interface
Ethernet RJ45, XC version
Active
1SAP 112 300 R0277 TB523-2ETH, teminal base AC500,
slots: 1 processor module,
2 communication modules, with
2 network interfaces Ethernet RJ45
Active
1SAP 114 100 R0270 TB541-ETH, slots: 1 processor
module, 4 communication modules,
with network interface Ethernet RJ45
Active
1SAP 314 100 R0270 TB541-ETH-XC, slots: 1 processor
module, 4 communication modules,
with network interface Ethernet RJ45,
XC version
Active
*) For planning and commissioning of new installations use modules in Active
status only.
Processor module PM591-2ETH can only be used with TB523-2ETH.
Processor modules PM57x-ETH(-XC), PM58x-ETH(-XC) and PM59x-ETH(-XC)
with ordering No. 1SAPxxxxxxR0271 can only be used with terminal bases
TB5x1-ETH(-XC) with ordering No. 1SAPxxxxxxR0270.
Device Specifications
Terminal Bases (AC500 Standard) > TB51x-TB54x
2019/04/173ADR010121, 13, en_US12