2.6.5.8 TA543 - Screw Mounting Accessory
The TA543 screw mounting accessory is used for mounting the processor module PM595
Ä
Chapter 1.2.1.2 “Onboard I/Os in Processor Module PM55x” on page 37 without DIN rail.
3x TA543 must be snapped on the backside of PM595
Ä
Chapter 2.6.3.3 “Mounting and
Demounting the Processor Module PM595” on page 1266.
Parameter Value
Weight 5 g
Dimensions 12 mm x 8.5 mm x 10 mm
Part No. Description Product Life Cycle Phase *)
1SAP 182 800 R0001 TA543, screw mounting
accessory for PM595
Active
*) For planning and commissioning of new installations use modules in Active
status only.
2.7 AC500-XC
2.7.1 System Data AC500-XC
Assembly, construction and connection of devices of the variant AC500-XC is
identical to AC500 (standard)
Ä
Chapter 2.6 “AC500 (Standard)” on page 1248.
The following description provides information on general technical data of
AC500-XC system.
2.7.1.1 Environmental Conditions
Table 224: Process and Supply Voltages
Parameter Value
24 VDC
Voltage 24 V (-15 %, +20 %)
Protection against reverse polarity Yes
120 VAC...240 VAC wide range supply
Voltage 120...240 V (-15 %, +10 %)
Frequency 50/60 Hz (-6 %, +4 %)
Intended Pur-
pose
Handling
Instruction
Technical Data
Ordering Data
System Assembly, Construction and Connection
AC500-XC > System Data AC500-XC
2019/04/17 3ADR010121, 13, en_US 1309
To Next Page
Loading...
