*) For planning and commissioning of new installations use modules in Active
status only.
1.8.1.8 TA571-SIM - Input Simulator
● Input Simulator for 6 digital inputs 24 VDC
● For usage with AC500-eCo processor modules
1 Contacts to connect to clamps of onboard I/Os
2 6 switches for the digital inputs DI0 ... DI5 (0 means opened switch, 1 means closed switch)
3 Terminal block for power supply connector of processor module PM55x/PM56x
The input simulator TA571-SIM is used for test and training purposes with AC500-eCo pro-
cessor modules PM55x and PM56x. It can simulate 6 digital 24 VDC input signals to the digital
inputs DI0...DI5 of onboard I/Os.
The diagram below shows the electrical connection of the input simulator.
Intended Pur-
pose
Electrical Dia-
gram
2019/04/17 3ADR010121, 13, en_US 1123
To Next Page
Loading...
