1 I/O bus
2 1 green LED to display power supply
3 1 red LED to display error
4 4 yellow LEDs to display the signal states of the inputs I0 to I3
5 4 yellow LEDs to display the signal states of the pulse train outputs P0 to P3
6 2 yellow LEDs to display the signal states of O0 to O1 (reserved)
7 Terminal number
8 Allocation of signal name
9 Terminal block for axis signals (9-pin)
10 Terminal block for axes signals and process supply voltage (11-pin)
11 2 holes for wall-mounting with screws
12 DIN rail
1.6.1.1.1 Intended Purpose
The function module FM562 for pulse train output (PTO) is used for simple positioning tasks
with servo drives or stepper drives. FM562 provides 2 axes with 2 inputs and 2 pulse-train out-
puts each.
It can be used at the following devices:
● Communication interface modules (e. g. CI501-PNIO, CI541-DP)
● Processor modules
It contains the following features:
Function Modules > S500-eCo
2019/04/17 3ADR010121, 13, en_US 635
To Next Page
Loading...
