ABB AC500 PLC - Connection of the Digital Inputs

DI0 1.0
DI1 1.1
DI2 1.2
DI3 1.3
DI4 1.4
DI5 1.5
DI6 1.6
DI7 1.7
DI8 2.0
DI9 2.1
DI10 2.2
DI11 2.3
DI12 2.4
DI13 2.5
DI14 2.6
DI15 2.7
+
-
AI0 3.0
+
-
AI1 3.1
+
-
AI2 3.2
+
-
AI3 3.3
AO03.5
AO13.7
AI- 3.4
AO-3.8
DC164.0
DC174.1
DC184.2
DC194.3
DC204.4
DC214.5
DC224.6
DC234.7
PTCPTC
1.8
3.82.8
4.8
UP +24 V DC
1.9
3.92.9
4.9
ZP 0 V
+
-
+
-
Fig. 79: Terminal assignment of the module
The module provides several diagnosis functions Ä Chapter 1.5.3.1.1.7 “Diagnosis”
on page 589.
Connection of the Digital Inputs
The following figure shows the electrical connection of the digital input DI0. Proceed with the
digital inputs DI1 to DI15 in the same way.
Fig. 80: Connection of the module
The meaning of the LEDs is described in the Displays Ä Chapter 1.5.3.1.1.8 “State LEDs”
on page 592 chapter.
Device Specifications
I/O Modules > Digital/Analog I/O Modules
2019/04/17 3ADR010121, 13, en_US 573