ABB AC500 PLC - 1.5 I;O Modules; 1.5.1 Digital I;O Modules; 1.5.1.1 S500-eCo; 1.5.1.1.1 DC561 - Digital Input;Output Module

1.5 I/O Modules
Hot swap
Preconditions for hot swapping I/O modules:
– Hot-swappable terminal units have the appendix TU5xx-H.
– I/O modules as of index F0.
– Communication interface modules CI5xx as of index F0.
Hot swapping is only allowed for I/O modules.
Processor modules and communication interface modules must not be removed
or inserted during operation.
Hot Swap
Further Information about Hot Swap for V2 Products see System Technology.
Further Information about Hot Swap for V3 Products see System Technology.
1.5.1 Digital I/O Modules
1.5.1.1 S500-eCo
1.5.1.1.1 DC561 - Digital Input/Output Module
● 16 configurable digital inputs/outputs 24 VDC,
● Connection via Interfast
● Module-wise electrically isolated
Device Specifications
I/O Modules > Digital I/O Modules
2019/04/17 3ADR010121, 13, en_US 171