Processor module PM591-2ETH can only be used with TB523-2ETH.
Processor modules PM57x-ETH(-XC), PM58x-ETH(-XC) and PM59x-ETH(-XC)
with ordering No. 1SAPxxxxxxR0271 can only be used with terminal bases
TB5x1-ETH(-XC) with ordering No. 1SAPxxxxxxR0270.
1.2.2.2 PM595
● High-performance processor module with 1.3 GHz
● XC version with 1 GHz for use in extreme ambient conditions available (maintenance free)
Fig. 4: Processor Module PM595
1 I/O bus for connection of I/O modules
2 2x 5 LEDs to display the states of the fieldbuses
3 Cover for battery and display
4 5 LEDs to display the states of the processor
module
5 5 LEDs (reserved)
6 2x 2 RJ45 interfaces for fieldbuses
7 Slot for memory card
8 Reset button (reserved)
9 Button (reserved)
10 RUN/STOP switch
11 Label
12 Slots for communication modules (max. 2; unused
slots must be covered with TA524)
13 2 RJ45 interfaces for Ethernet connection
14 5-pin terminal block (reserved)
15 Serial interface COM2 (D-sub 9)
16 Serial interface COM1 (9-pin terminal block, remov-
able)
17 Power supply (5-pin terminal block, removable)
18 4 holes for wall mounting
19 DIN rail
Sign for XC version
Processor Modules > AC500 (Standard)
2019/04/173ADR010121, 13, en_US80
To Next Page
Loading...
