ABB AC500 PLC - 1.3.7.1.5 Ordering Data; 1.3.7.2 CM592-DP - PROFIBUS DP Master

Parameter Value
Usable terminal bases
All TB5xx Ä Chapter 1.1.1 “TB51x-TB54x”
on page 4
Current consumption from 24 VDC power
supply at the terminal base of the CPU
Typ. 65 mA
Internal power supply Through the communication module interface
of the terminal base
Maximum number of cyclic input data 244 bytes
Maximum number of cyclic output data 244 bytes
Maximum number of acyclic read/write 240 bytes
Configuration data max. 244 bytes
Parameter data 237 bytes application specific parameters
Processor Hilscher netX100
Internal RAM memory 8 MB
External Flash memory 8 MB
Weight Ca. 150 g
Parameter Value
Interface socket 9-pin, D-sub socket
Transmission standard EIA RS-485 acc. to IEC 61158/61784, poten-
tial-free
Transmission protocol PROFIBUS DP
Transmission rate 9.6 kbit/s up to 12 Mbit/s
1.3.7.1.5 Ordering Data
Part No. Description Product Life Cycle Phase *)
1SAP 172 200 R0001 CM582-DP, communication module
PROFIBUS DP slave, 12 MBit/s
Active
1SAP 372 200 R0001 CM582-DP, communication module
PROFIBUS DP slave, 12 MBit/s,
XC version
Active
*) For planning and commissioning of new installations use modules in Active
status only.
1.3.7.2 CM592-DP - PROFIBUS DP Master
● Master 12 Mbit/s
● XC version for use in extreme ambient conditions available
Technical Data
of the Interface
Device Specifications
Communication Modules (AC500 Standard) > PROFIBUS
2019/04/173ADR010121, 13, en_US128