Parameter Value
Acyclic services PNIO read / write
CM589-PNIO < FW 1.4.0: max. 1024 bytes
CM589-PNIO ≥ FW 1.4.0: max. 8096 bytes
CM589-PNIO-4: max. 8096 bytes
Total quantity of input and output data CM589-PNIO < FW 1.4.0 (respectively for
input and output): max. 1024 byte
CM589-PNIO ≥ FW 1.4.0 (respectively for
input and output): max. 1440 byte
CM589-PNIO-4 (respectively for input and
output): max. 1440 byte
Min. bus cycle 1 ms
Conformance class CC B
*) Setting NameOfStation via service "DCP SET NameOfStation" is enabled only if rotary
switches are adjusted to position "00".
1.3.8.2.6 Ordering Data
Part No. Description Product Life Cycle Phase *)
1SAP 172 900 R0011 CM589-PNIO, PROFINET
communication module
Active
1SAP 372 900 R0011 CM589-PNIO-XC, PROFINET
communication module, XC version
Active
1SAP 172 900 R0111 CM589-PNIO-4, PROFINET
communication module
Active
1SAP 372 900 R0111 CM589-PNIO-4-XC, PROFINET
communication module, XC version
Active
*) For planning and commissioning of new installations use modules in Active
status only.
Communication Modules (AC500 Standard) > PROFINET
2019/04/173ADR010121, 13, en_US144
To Next Page
Loading...
