ABB AC500 PLC - 1.5.2.2.5 AX522 - Analog Input;Output Module; Intended Purpose

1.5.2.2.5 AX522 - Analog Input/Output Module
● 8 configurable analog inputs (I0 to I7) in 1 group (1.0...2.7)
Resolution 12 bits plus sign
● 8 configurable analog outputs (O0 to O7) in 1 group (3.0...4.7)
Resolution 12 bits plus sign
● Module-wise electrically isolated
● XC version for use in extreme ambient conditions available
1 I/O bus
2 Allocation between terminal number and signal name
3 8 yellow LEDs to display the signal states at the analog inputs (I0 - I7)
4 8 yellow LEDs to display the signal states at the analog outputs (O0 - O7)
5 1 green LED to display the state of the process supply voltage UP
6 2 red LEDs to display errors
7 Label
8 Terminal unit
9 DIN rail
Sign for XC version
Intended Purpose
The device can be used as a decentralized I/O extension module for S500 Communication
Interface Modules (e. g. CI592-CS31, CI501-PNIO, CI541-DP, CI581-CN) or as a centralized
extension module for AC500 CPUs (PM5xx).
Device Specifications
I/O Modules > Analog I/O Modules
2019/04/173ADR010121, 13, en_US544