Fig. 108: Electrical connection (single-ended) of pulse train output
For drives/amplifiers with high-impedance pulse input interface like MicroFlex,
the cable ends must be equipped with 100 Ω terminating resistors to eliminate
signal reflections. Normally, the resistors are integrated in the interface connec-
tors.
1.6.1.1.3 Internal Data Exchange
Parameter Value
Axes input data (words) 16
Axes output data (words) 16
1.6.1.1.4 I/O Configuration
The pulse-train output module FM562 does not store configuration data itself.
Function Modules > S500-eCo
2019/04/17 3ADR010121, 13, en_US 643
To Next Page
Loading...
