ABB AC500 PLC - 1.2.1.3.4 Internal Data Exchange; 1.2.1.3.5 I;O Configuration; 1.2.1.3.6 Parameterization; 1.2.1.3.7 Diagnosis

Connection of analog actuator (voltage) Connection of analog actuator (current)
1.2.1.3.4 Internal Data Exchange
Parameter Value
Digital inputs (bytes) 1
Digital outputs (bytes) 1
Analog inputs (bytes) 4
Analog outputs (bytes) 2
1.2.1.3.5 I/O Configuration
The configuration data of the onboard I/Os is stored in the processor module PM56x.
1.2.1.3.6 Parameterization
For information about parameterization, refer to the description for onboard I/Os for processor
podule PM56x AC500-eCo Onboard I/Os.
1.2.1.3.7 Diagnosis
E1...E4 d1 d2 d3 d4 Identifier
000...063
AC500-
Display
<− Display in
Class Comp Dev Mod Ch Err PS501
PLC
Browser
Class Inter-
face
Device Module Channel Error-
Identifier
Error message Remedy
Errors for Onboard I/O
Light errors
3 8 255 2 0 3 MaxWaitRun for
onboard I/O module
has expired, when PLC
is put into RUN state
Reboot
and try it
again. If
the error
still exists,
replace
processor
module for
testing
Device Specifications
Processor Modules > AC500-eCo
2019/04/17 3ADR010121, 13, en_US 57