ABB AC500 PLC - 1.5.1.1.3 DI561 - Digital Input Module; Intended Purpose

1.5.1.1.3 DI561 - Digital Input Module
● 8 digital inputs 24 VDC (I0 to I7) in 1 group
● Module-wise electrically isolated
1 I/O bus
2 8 yellow LEDs to display the signal states of the inputs I0 to I7
3 Terminal number
4 Allocation of signal name
5 Terminal block for input signals (9-pin)
6 2 holes for wall-mounting with screws
7 DIN rail
Intended Purpose
The device can be used as a decentralized I/O extension module for S500 Communication
Interface Modules (e. g. CI592-CS31, CI501-PNIO, CI541-DP, CI581-CN) or as a centralized
extension module for AC500 CPUs (PM5xx).
The inputs are group-wise electrically isolated from each other.
All other circuitry of the module is electrically isolated from the inputs.
Device Specifications
I/O Modules > Digital I/O Modules
2019/04/173ADR010121, 13, en_US190