ABB AC500 PLC - Group Parameters for the Analog Part; Channel Parameters for the Analog Inputs (4 x)

Name Value Internal value Internal value,
type
Default
Behaviour DO at
comm. error *)
Off
Last value
Last value 5 sec
Last value 10 sec
Substitute value
Substitute value
5 sec
Substitute value
10 sec
0
1
6
11
2
7
12
BYTE Off
0x00
Substitute value
at output
0...255 00h...FFh BYTE 0
0x0000
*) The parameters Behaviour DO at comm. error is only analyzed if the Failsafe-mode is ON.
Group Parameters for the Analog Part
Name Value Internal value Internal value,
type
Default
Analog data
format
Standard
Reserved
0
255
BYTE 0
Behaviour AO at
comm. error *)
Off
Last value
Last value 5 s
Last value 10 s
Substitute value
Substitute value
5 s
Substitute value
10 s
0
1
6
11
2
7
12
BYTE 0
*) The parameter Behaviour AO at comm. error is only analyzed if the Failsafe-mode is ON.
Channel Parameters for the Analog Inputs (4x)
Name Value Internal value Internal value,
type
Default
Input 0, Channel
configuration
see table
1
) see table
1
)
BYTE 0
Input 0, Check
channel
see table
2
) see table
2
)
BYTE 0
: : : : :
: : : : :
Device Specifications
Communication Interface Modules (S500) > CS31
2019/04/173ADR010121, 13, en_US796