ABB AC500 PLC - Intended Purpose

1 I/O bus
2 8 yellow LEDs to display the signal states of the outputs O0 to O7
3 Terminal number
4 Allocation of signal name
5 Terminal block for output signals (11-pin)
6 2 holes for wall-mounting with screws
7 DIN rail
Intended Purpose
The device can be used as a decentralized I/O extension module for S500 Communication
Interface Modules (e. g. CI592-CS31, CI501-PNIO, CI541-DP, CI581-CN) or as a centralized
extension module for AC500 CPUs (PM5xx).
The outputs are group-wise electrically isolated from each other.
All other circuitry of the module is electrically isolated from the outputs.
The I/O module must not be used as a decentralized I/O module with CI590-
CS31-HA bus modules.
Device Specifications
I/O Modules > Digital I/O Modules
2019/04/17 3ADR010121, 13, en_US 223